Magnetic flooring is attaining reputation as a flooring possibility because of its very simple set up and reduced volatile organic and natural compounds (VOC) output. And its glue-a lot less attachment procedure helps make it simple enough for a newbie to tackle.
What is magnetic flooring?
Magnetic flooring will come as two levels: a magnetic underlayment that goes between the sub-flooring and the flooring, and the flooring content that has ferrous (iron-primarily based) steel powder in it. For the reason that the underlayment works by using magnets to connect the flooring tiles, no glue or adhesive is required. When magnets are recognized to damage some electronics, this form of magnet isn’t strong more than enough to do any harm until you’re functioning with precise scientific devices.
The tools and resources you’ll have to have for installation
To set up magnetic flooring, you’ll have to have flooring and underlayment, some seam tape, a straight-edge, tape evaluate, and a utility blade. For some of the tile kinds, like ceramic or wood, you will also need to have a saw that can reduce the flooring type you are applying and a sq. to mark your cuts.
G/O Media could get a commission
Putting in your underlayment
Commence laying your flooring by generating sure that the sub-floor is free of debris or dirt. Since the underlayment requires to spread out as flat as probable to make good get in touch with with the tiles, reducing the bumps beneath it will make it all the easier to place collectively. Then, roll out the magnetic underlayment all in the same route. Here’s when the straight edge will come in useful: Trim the underlayment to the edges of the flooring and close to molding with your utility knife, applying the straight edge as a manual then, use your seam tape to seal all of the seams between items of underlayment. This is important to generate a moisture barrier, but also to preserve the underlayment from relocating around even though you are laying the floor.
Laying your new flooring
Then, all you need to have to do is lay the flooring on leading of your underlayment. For carpet and vinyl tile, you can reduce all over walls and molding with a utility blade for other flooring styles, you’ll will need to use a talent observed or tile observed. The hardest part will be setting up with a straight line to get a great fit. Select a wall and get started laying the flooring horizontally versus it from one particular corner out to give you a strong baseline to continue on your sample from. Perform the pattern till you arrive at the reverse wall, and then go again to do your custom cuts around partitions and moldings. (An advantage of the magnetic attachment strategy is that you really do not have tongue-and-groove or click-jointly edges, so you can just put tailor made cuts in the openings wherever they in good shape.)
The pros and cons of magnetic flooring
The trade off with very simple, secure magnetic flooring is that it’s normally additional high priced than other flooring sorts. Even so, the underlayment will past for additional than one particular software, so it also minimizes squander (and time, and some funds) when you want to modify your flooring once again. So if you want a very simple, fast, and strong flooring form and have the funds to spend for it, magnetic flooring is a excellent possibility.